Bare Emitter Nozzles

Standard, drip-reduced misting nozzle. The check valve in this nozzle opens at approximately 30psi. When the system pressure drops below that point, the valve closes and dramatically reduces the large drops of water that would normally collect on the end of the nozzle and drop into your environment.

Produces a droplet size of approximately 55 microns. Made of acetal plastic to resist clogging due to hardwater. Supplied with 100 mesh filter.

HerpMist.com provides a range of these nozzles in both standard and non-drip style to suit the wide range of our customers' needs.